MIQRO Series Extract Kit

MIQRO Series Extract Kit

$9.11 USD
$16.22 USD $9.11 USD
Ships from our Canada warehouse

Make your MIQRO Vaporizer dual use.

Stock up with 6 porous ceramic discs and organic cotton pads to turn any MIQRO into a dual use vaporizer. Place any type of extract onto the disc or pad and into a dosage pod for easy use and keeping the oven clean.

Compatible with MIQRO and MIQRO-C Vaporizers

What's in the Box:

  • 6 MIQRO Series Porous Ceramic Discs
  • 6 Organic Cotton Pads

FAQ

Answers that make it easier to light up your ritual.

What temperature settings are available?

The EQ offers two modes: 

  • Precision Temperature Mode: Set any temperature from 450-650°F (232-343°C). The temperature remains constant throughout your session for optimal flavor consistency. 

The default temperature is 550°F (288°C) or your last set precision temperature. 

  • Smart Path™ Mode:  

 Choose from 4 customizable paths. Default Smart Paths are: 

  • Atomic: 600-620°F (316-327°C) 
  • Clouds: 560-580°F (293-394°C) 
  • Flavor: 520-540°F (271-282°C) 
  • Terpene: 480-500°F (249-260°C) 

 You can customize the paths, duration and name under the settings screen.  

What's the best way to load concentrates?

You have two options:

  • Cold Start: Load concentrates into the quartz crucible before turning on the heater for more flavorful, smoother vapor as terpenes are individually expressed
  • Hot Start: Load concentrates once the crucible is hot for higher strength vapor

Use the included loading tool and avoid overloading the crucible

How do I turn the device on/off?

Click the Command Button 5 times to power the EQ on or off. The device automatically shuts down after 5 minutes of inactivity or when the battery becomes critically low.

How much water should I add to the Jacuzzi bubbler?

Fill the bubbler no more than halfway up. Always remove the bubbler from the base before filling to avoid water damage. Use clean or distilled water for best performance and replace regularly.

How do I charge my EQ?  

Connect the provided USB-C cable to the port on the side of the base. The EQ charges at 5V and up to 2A, taking approximately 2-3hours for a full charge.